OFF indicates that independent mode is not activated and the modem will not answer any call when the PC is off. ON if the modem receives a valid data signal carrier from a remote modem, indicating that data transmission is possible. If you fail to enter the correct password, the modem will end the call and go back on-hook. If you are using Dial-Up Networking, it may not be configured correctly. In user documentation, the term usually refers to 8-bit units or characters.

Uploader: Nam
Date Added: 28 September 2008
File Size: 25.22 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45459
Price: Free* [*Free Regsitration Required]

Click StartSettingsand Control Panel. This command terminates with OK when either the specified amount of silence is detected or when the user types anything which is ignored.

When Control Panel opens, double-click Modems.

Hz Hertz is a frequency measurement unit used internationally to indicate cycles per second. Click the Hardware tab. Double-click the description of your new modem, then click the Driver tab. USRobotics warrants to Customer that each software program licensed from it will perform in substantial conformance to its program specifications, for a period of ninety 90 days from the date of purchase from USRobotics or its authorized reseller.

Click Startselect Settingsthen click Control Panel. Next, make sure that your COM ports are configured correctly. The ControlCenter morem allows you to easily configure the settings of your new Mmodem. Be sure you know what type of line you have. There should be no line splitters, fax machines, or other devices measage the modem and the telephone wall jack.


The 56K Message Modem includes features that allow the user to receive fax and voice messages without the intervention of the PC. After attaching the external modem cable to my test system I powered up the modem and system and waiting for plug and pray…um, play, to do its thing. You may also turn off your messagr and still receive messages remotely.

USRobotics 56K Professional Message Modem Specs – CNET

This response is used u.s.rovotics when the fax mode is selected. Try reinstalling your modem using the instructions on this Guide for your operating system. This guard time allows the modem to distinguish between a line disturbance from a true disconnect hang up by the remote modem. Character checking has been surpassed by more reliable and efficient forms of error checking, including V. For bps communication, most U.

The ControlCenter software allows you to configure your V. The shortened form of binary digit is bit. To verify that your modem is functioning properly, repeat the steps listed under your specific operating system.

This option only applies to connections terminated by dropping DTR. Click Start and then click Control Panel. PCM-Upstream” technology, which allows a medsage upstream communication to reach speeds of 48, bps.


Double-click the description of the dial-up networking connection, and select Properties. Autodial is used to dial voice numbers. Software compatibility mode This setting disables the codes and displays the code instead The actual rate of the call can be viewed on the ATI6 screen Used for unusual software incompatibilities Some software may not messaage12, and 14, bps or greater result codes.

Read This First!

Retrieve your voice mail to restore your normal dial tone. You may have devices between the modem and the phone jack. USRobotics warrants any replaced or repaired product or part for ninety 90 days from shipment, or the remainder of the initial warranty period, whichever is longer.

Double-click the Phone and Modem Options icon. If you ever need to call our Technical Support department, you will need this number to receive assistance. If a previous modem is already using the available COM port, you can either use another COM port modsm uninstall the previously installed modem.

Author: admin